PC Pals Forum

Technical Help & Discussion => Self Building, Upgrading & General Hardware Help => Topic started by: jon996 on October 26, 2004, 15:06

Title: epox 8kta3
Post by: jon996 on October 26, 2004, 15:06

hi all...

iv jus got a new mobo..well new to me and tis quite strange...on the mobo there are two little digital number thingys and they say FF?? wot does this mean?!

chars...jon ;)

Title: Re:epox 8kta3
Post by: TR on October 26, 2004, 15:16

Jon.. I reckon if you look at the Manual or dload the manual if you havnt got 1? and a rough guess will be that it will be like the Bios beeps and if there is something wrong with the Mobo it will show up with a number fault  ;) I stand to be corrected as always  ;D



 ;D  ;D  ;D

Quote

The onboard P80P Debug Card provides very detailed POST debugging information via two hexadecimal LEDs. In fact, four pages of the manual are dedicated to the 50+ codes. I much prefer this type of debugging over both beep codes and voice-related debugging. Unlike the other methods which only provide error codes (the single post ?beep? notwithstanding), these LEDs monitor the status of the entire POST process.

Title: Re:epox 8kta3
Post by: jon996 on October 26, 2004, 15:19

thnk you very much hooky ;) :thumb:

Title: Re:epox 8kta3
Post by: TR on October 26, 2004, 15:30

Lucky Guess I guess  ;D

Title: Re:epox 8kta3
Post by: jon996 on October 26, 2004, 16:26

jus one more thing...wot is a safe temperature for a 1.2 athlon?...

Title: Re:epox 8kta3
Post by: TR on October 26, 2004, 17:26

Quote from: >>jon on October 26, 2004, 16:26

jus one more thing...wot is a safe temperature for a 1.2 athlon?...

Look here Jon (http://www.pantherproducts.co.uk/Articles/CPU/CPU%20Temperatures.shtml)

Title: Re:epox 8kta3
Post by: jon996 on October 26, 2004, 17:41

ahh thnk you nowonder you have a star in your name...