2 Port ATA-133 PCI RAID Card
Requires Spare PCI Slot -- In stock (11/10/04 16:52) £12.31 inc vat should do you Simon, from :
http://www.cclcomputers.biz/Features
2 independent IDE/ATA channels
Compliant with PCI Specification Revision 2.2
Compliant with PCI IDE Controller Specification Revision 1.0
Support RAID sets (striped, mirrored, & mirrored striped) or Single Drive configuration
Supports up to four IDE/ATA Devices
Supports mixed drive manufacturers and capacities in the same RAID set
Supports large capacity Drives 137GB plus
Supports Ultra and Multiword DMA timing modes
CRC (Cyclical Redundancy Check)
128 Bytes Buffer
Built in 80 Pin cable detect circuitry
Supports Bus Master DMA at 133MB/sec PCI burst rate
3.3V Operating Voltage with 5V tolerant I/O
System Requirements
IBM Compatible PC
Windows 98SE/ME/NT 4.0/2000/XP
Available PCI slot
Pentium CPU or faster
Minimum 64MB RAM
Package Contents
1x ATA133 RAID PCI Card
1x IDE Cable
Driver CD
Installation Guide
As I thought, it has its own BIOS which means it can overcome any hard drive capacity limitations of your original mobo/bios too