Sponsor for PC Pals Forum

Author Topic: factory defualts  (Read 2726 times)

Offline measter

  • Established Member
  • ****
  • Posts: 505
factory defualts
« on: April 30, 2004, 09:35 »
i'm trying to reset my moniter to the factory defaults, but i'm unsure how. it's a Nissei Sangyo L5AK5 according to belarc.
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Offline Sandra

  • Ultimate Member
  • *******
  • Posts: 12155
Re:factory defualts
« Reply #1 on: April 30, 2004, 11:58 »
Just uninstall it from inside the Device Manager and reboot your pc.
When it restarts it will detect it and install it again as it was originally installed  :)

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #2 on: April 30, 2004, 16:32 »
hmm, i don't see how that would reset the moniter to it's defualts. :-\
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Offline ketamininja

  • Full Member
  • ***
  • Posts: 270
Re:factory defualts
« Reply #3 on: April 30, 2004, 19:32 »
Ah, are you referring to the changes you've made in the picture size, brightness, vertical/horizontal width etc??

There should be a button on your montior call degauss or something. I think it looks like a an ARC with a line through it.

http://whatis.techtarget.com/definition/0,,sid9_gci213666,00.html

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #4 on: April 30, 2004, 20:55 »
if i'm right, thats only for crt moniters, i got a tft.
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Offline Simon

  • Administrator
  • *****
  • Posts: 77122
  • First to score 7/7 in Quiz of The Week's News 2017
Re:factory defualts
« Reply #5 on: April 30, 2004, 21:27 »
Is there nothing in the manual which tells you how to restore factory settings, Measter?
Many thanks to all our members, who have made PC Pals such an outstanding success!   :thumb:

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #6 on: April 30, 2004, 21:36 »
not that i cam find. :-\
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Adept

  • Guest
Re:factory defualts
« Reply #7 on: May 01, 2004, 09:52 »
If it can do it, it'll be an option on the setup menu Measter.

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #8 on: May 01, 2004, 15:22 »
nope, nothing on there.

anyway, another question, i got myself a new hard drive, but i'm unable to make windows recognise it without enabling that plug in teh bios. but i can't see anything before an os boots. the moniter says "out of range" then lists the verticle and horizontal frequency. for some reason, the verticle frequency is too low, so i can't see anything. :-\ also, for some reason it tries to put the res at 1280xsomething, but my moniter can only do up to 1024x768. you lot know how to fix this?
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #9 on: May 05, 2004, 00:14 »
hello? :'(
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Offline Dack

  • Established Member
  • ****
  • Posts: 831
Re:factory defualts
« Reply #10 on: May 05, 2004, 08:25 »
TFT's tend to be a different kettle of bananas.

Usually they have an 'auto' button/menu option which will analyse the signal being sent to them and set their optimal settings based on that.

As to the problem on startup - sounds like the graphics card is putting out a non-standard vesa graphics mode that the monitor can't handle. Sometimes switching the monitor off and back on will cause it to sync up - so switch the computer on, press the correct key to get into the bios and then cycle power on the monitor.
hey promised the earth! Then delivered mud.
Technically it did meet the spec.

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #11 on: May 05, 2004, 23:58 »
k, i'll try that when i next boot up.
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Offline measter

  • Established Member
  • ****
  • Posts: 505
Re:factory defualts
« Reply #12 on: May 06, 2004, 22:30 »
ok, tried that, no joy. :-\
img]http://members.lycos.co.uk/borged/sigs/ep/19.jpg[/img]
Current CPU Info

Adept

  • Guest
Re:factory defualts
« Reply #13 on: May 08, 2004, 18:41 »
Can you recap which question you'd like us to answer Measter. I got lost along the way ::) so a recap would be useful at this stage :)


Offline Rodders

  • Forum Fanatic
  • ******
  • Posts: 6495
  • Bournemouth: Where even the water is 'ard!
Re:factory defualts
« Reply #14 on: May 08, 2004, 18:52 »
...and hosting your sig with an ISP that allows external linking of images, might not be a bad idea either.   ;)


Show unread posts since last visit.
Sponsor for PC Pals Forum