Author Topic: cpu clock ratio (Read 1655 times)

peruvianpisco · « **on:** February 14, 2006, 14:15 »

Hello
There is something i don`t understand, i got Award software- cmos setup, i got cpu host clock 100 and cpu clock ratio X4 , well, but no matter if i change this value, always i got 100 x 12 ( the maximum because i use celeron 1,2 ghz).. i don`t know how this value is unable to change, the manual of my jetway mobo doesn`t say anything about multiplier jumpers. just bus clock.
This 100 x 12 appears in POST and Everest , so it`s real...what`s happening?

Thank you in advance

Sandra · « **Reply #1 on:** February 14, 2006, 15:38 »

Some CPUs are locked and you need to unlock them in order to alter the multiplier.
Different CPUs use different methods and some cant be unlocked.
Its not something I have ever done though.
I prefer to leave the CPU settings at default as that causes less problems usually.

peruvianpisco · « **Reply #2 on:** February 14, 2006, 19:19 »

Ok, thank you, that explains all...so that is the reason why it can`t be used with mobo supporting less than 1 ghz, with the same socket, or am i wrong and this is another of my newbie stuff?

Sandra · « **Reply #3 on:** February 14, 2006, 19:27 »

I am not 100% certain but I think thats the answer.